500W Mos-Fet Power Inverter from 12V to 110V/220V
This circuit will provide a very stable
"Square Wave" Output Voltage. Frequency of operation is determined by a
pot and is normally set to 60 Hz. Various "off the shelf" transformers
can be used. Or Custom wind your own FOR BEST RESULTS. Additional
MosFets can be paralleled for higher power. It is recommended to Have a
"Fuse" in the Power Line and to always have a "Load connected", while
power is being applied. The Fuse should be rated at 32 volts and should
be approximately 10 Amps per 100 watts of output. The Power leads must
be heavy enough wire to handle this High Current Draw!
0 comments:
Post a Comment