This is a simple audio amplifier using a TL431 shunt regulator. The amplifier will provide room-filling volume from an ordinary crystal radio outfitted with a long-wire antenna and good ground. The circuitry is similar in complexity to a simple one-transistor radio but the performance is far superior. The TL431 is available in a TO-92 package and it looks like an ordinary transistor so your hobbyist friends will be impressed by the volume you are getting with only one transistor!
Simple Crystal Radio Audio Amplifier Circuit Diagram
The amplifier may be used for other projects, too. Higher impedance headphones and speakers may also be used. An earphone from an old telephone will give ear-splitting volume and great sensitivity! The 68 ohm resistor may be increased to several hundred ohms when using high impedance earphones to save battery power.
To use the circuit as a general-purpose amplifier, apply the input signal to the top of the potentiometer. (Leave out the diode and .002 uF capacitor.) A higher value potentiometer may be used for a higher input impedance.
To use the circuit as a general-purpose amplifier, apply the input signal to the top of the potentiometer. (Leave out the diode and .002 uF capacitor.) A higher value potentiometer may be used for a higher input impedance.
© 1995, Charles Wenzel
0 comments:
Post a Comment