Individual solar-panel systems produce dc power for remote applications
while also storing energy in a rechargeable battery supported by a
battery-charger IC. In non-utility grid applications solar panels
produce dc power for emergency roadside telephones, navigation buoys,
and other remote loads. Virtually all 12-V-system solar panels comprise a
series of photovoltaic cells that have a maximum output power of less
than 25 W.
In producing this power the solar-panel system uses a battery to provide
power when the panel is “dark.” The rechargeable battery can supply
power for long periods of time, requiring a charger that can properly
operate a solar panel. Meeting this need is Linear Technology’s LT3652
monolithic buck-charger IC, which operates with a single solar panel.
The IC uses average-current-mode control-loop architecture to provide constant current/constant voltage (CC/CV) charge characteristics with a programmable charge current. The charger can be programmed to produce a 14.4-V float voltage. Housed in a 3- × 3-mm DFN-12 package, the IC can charge a variety of battery configurations, including up to three Li-Ion/Polymer cells in series, up to four Lithium Iron Phosphate (LiFePO4) cells in series, and sealed lead-acid batteries up to 14.4 V. [Link]
The IC uses average-current-mode control-loop architecture to provide constant current/constant voltage (CC/CV) charge characteristics with a programmable charge current. The charger can be programmed to produce a 14.4-V float voltage. Housed in a 3- × 3-mm DFN-12 package, the IC can charge a variety of battery configurations, including up to three Li-Ion/Polymer cells in series, up to four Lithium Iron Phosphate (LiFePO4) cells in series, and sealed lead-acid batteries up to 14.4 V. [Link]
0 comments:
Post a Comment